What do you want to step on the clutch when turning?Many old drivers are not sure!

The

the first thing to know the function of the clutch is cut off and convenient connection of the drive shaft power shift.Cars tend to slow down when turning in low-grade (can be in front of the bend, bend, bend after the shift) shifting clutch.Clutch no other reduction effect, on the clutch is equivalent to neutral, if catch up with the slope is still very dangerous at this time.

what do you want to step on the clutch when turning? Many old drivers are not sure!

car steering, or slide when driving fast:

refers to the vehicle sideslip urgent acceleration, sudden braking or start to shake, excessive torque caused by lateral vehicle side slip is easy to cause an accident.When driving in this case, use the following method can well control vehicles: when the speed too fast, car will never turn according to the intention of the driver and continue to push forward, at this time just loosen the throttle, tap the brakes will make the car back on the right track, if the steering Angle is too big, can be slightly back to the steering wheel, can eliminate the phenomenon of understeer.

what do you want to step on the clutch when turning? Many old drivers are not sure!

when cornering has been trampled clutch could be dangerous:

on clutch cornering is usually manually beginners do, first opponent dynamic driving skill is not skilled, plus a habit in the driving school.They often cornering speed is slow, normal forward by traction engine, vehicle traction engine can maintain the stability of the vehicle to go forward, if you encounter a little accident, held the steering wheel by the strength of the traction engine and chassis is generally ok.But once lost traction vehicle, any delay on the road, will be disaster, especially the cornering is that due to centrifugal force of the vehicle use, this time more.

what do you want to step on the clutch when turning? Many old drivers are not sure!

but the speed is quick, sharp, refer to bound to brake to slow down, step on the clutch, shift down , don't slow down easy out of control, not down, underpowered after bending, and the car easy to shiver, even flameout.The speed was slow, or when the large radius turns, just hit the brake, the appropriate reduction, cheer after bending can be accelerated, not trample clutch shift.Turn to, is to keep a good speed, brake to slow down first, according to the size of the bend, to slow down, big bend, less sharp reduced quickly, and then play direction shift, after completion of the shift after bending to speed up.

what do you want to step on the clutch when turning? Many old drivers are not sure!

should be paid attention to when the car turning:

1, when the car turning speed slower, turn the steering wheel too nasty, lest cause car sideslip centrifugal force is too large.If, when the car skid shall be immediately relax accelerator pedal, the steering wheel turned to the side of the rear wheel sideslip, after waiting for vehicles running back upright direction, is to go back to the steering wheel.

what do you want to step on the clutch when turning? Many old drivers are not sure!

2, should try to avoid the use of brakes when the car turning, especially the emergency brake, to prevent the occurrence of sideslip or accident.

3, when the car turning, to manipulate the steering wheel corresponds to a road camber, and coordinates with the driving speed, achieve the steering Angle, steering timely, appropriate turning direction in a timely manner.Hands off the steering wheel is forbidden in case the direction of running deviation and risk.

there are more cars, search WeChat number: public bus master.Free online answer for you.

The related content recommendation